| Error Codes | Message and Solution |
| E 01 | An indication to open and close the door properly |
| E 02 | An indication to turn the water tap ON |
| E 03 | The plug needs to be fit properly/the socket needs to be replaced |
| E 04 | The code indicates that the washer will restart after about 30 min |
| E 05 | A message that the programme time is extended due to low inlet water temperature / low input voltage |
| E 06 | An indication to clean coin trap |
| r ın5 HOLd | An indication to press the start/pause button or select the drain program |
| dLEr | Switch OFF the program selector |
| dLAY | Meaning that the start mode will be delayed |
| tAP | An indication to turn ON the tap |
| tACO / trC | The code states that the program selector must be switched OFF with a 2-second waiting time |
| OFEr / Pr5 | Switch OFF the program selector and wait for 2 seconds before restarting. |
| dPEr | An indication to press the Start/Pause button to restart the drain |
| HEAt | This indicates that the drain program should be started after the water cools down to approximately 60C. |
| ACHı | Meaning that the machine will start automatically after the voltage DECREASES to sade operating level. |
| ACLo | Meaning that the machine will start automatically after the voltage INCREASES to sade operating level. |
| H260 | The message indicates that the mains voltage is too high [over 260v]Self-righting when voltage returns to normal. |
| UnbL | The code indicates that the laundry load is small, which can lead to an unbalanced condition. |
| L175 | L means Low voltage. Once the power is back, the washing machine will resume.READ | Blue Star AC Error Codes list: What do the Blue Star AC error codes mean? Find out |
| door | The door should be opened or closed properly |
Add a Comment